FLUSH: Self-Clinching Fasteners

FSUK-FLUSH

Description

The FSUK Flush range provides a strong reusable thread in sheet metal with a flush finish on both sides. It is designed to be installed into drilled or punched holes and must always be installed using a squeeze action. The tolerance on the hole must be -0.00 + 0.13mm. The Nuts are manufactured from stainless steel and must be installed into sheet hardness of less than 70 Rockwell B.

Dimensions

threadshankBCPholesizesheet thicknessMin Dis**
M2.514.84.351.54.41.56.0
M2.524.84.352.34.42.46.0
M314.84.351.54.41.56.0
M324.84.352.34.42.46.0
M3 (5.4)16.45.351.55.41.56.5
M3 (5.4)26.45.352.35.42.46.5
M3.516.45.351.55.41.56.5
M3.526.45.352.35.42.46.5
M417.97.351.57.41.57.2
M427.97.352.37.42.47.2
M518.77.901.57.91.58.8
M528.77.902.37.92.48.8
M619.58.753.18.753.28.8
M629.58.753.98.754.08.8

** = Min distance to hole c/l to edge

Advantages

HIGH PULL OUT AND BODY TORQUE PROVIDES FLUSH FINISH TO BOTH SIDES OF THE SHEET

Comments

HOW TO SPECIFY:
FSUK M4-1 FLUSH NUT
ONLY AVAILABLE IN STAINLESS TO ENSURE STRONG INTERNAL THREAD

click HERE for a PDF version of this brochure page

Most sizes available from stock contact fsuk for further info.