SCRS: Inserts for Plastics, Metals and Composites

FSUK-SCRS

Description

The SCRS range is a Self Tapping range of inserts with internal and external threads and 3 holes to aid installation. Its designed to be installed into drilled or moulded holes generally for Thermosetting Plastics with up to 50% Glass Filled like Grivory. They are also an Excellent Insert to obtain a wear free, vibration resistant insert for Aluminium and Aluminium and Magnesium alloys. Can also be used in Thermo Plastics.

Dimensions

threadBPEholesizeholesize 2
M5-77187.4-7.67.6-7.7
M5-1010187.4-7.67.6-7.7
M6-881.25109.3-9.59.5-9.6
M6-12121.25109.3-9.59.5-9.6
M8-991.51211.1-11.311.3-11.5
M8-14141.51211.1-11.311.3-11.5
M10-10101.51413.1-13.313.3-13.5
M10-18181.51413.1-13.313.3-13.5
M12-12121.751615.0-15.215.2-15.4
M12-22221.751615.0-15.215.2-15.4
M14-141421817.0-17.217.2-17.4
M14-242421817.0-17.217.2-17.4
M16-141422019.0-19.219.2-19.4
M16-242422019.0-19.219.2-19.4

Advantages

HIGH PULL OUT RESISTANCE, DEVELOPED FOR MATERIALS WITH DIFFICULT CUTTING PROPERTIES, THE INSERT HAS A THICK WALL AND THE CUTTING FORCE IS DISTRIBUTED OVER THREE CUTTING EDGES. SHORTER VERSION AVAILABLE IN ALL SIZES WHERE MINIMAL MATERIAL THICKNESSES ARE INVOLVED. GENERALLY SOLD IN HARDENED STEEL WITH A RoHS COMPLIANT ZINC AND CLEAR PASSIVATION.

Comments

TO SPECIFY SIMPLY SPECIFY THE INSERT TYPE- FSUK SCRS AND THEN THE THREAD SIZE, LENGTH AND THEN FINISH FOR EXAMPLE, A M8-14 LONG WOULD BE FSUK SCRS M8-14-Z (Z= ZINC AND CLEAR PASS). ALSO AVAILABLE IN STAINLESS. M8, M10 AND M12 CURRENTLY STOCKED BUT MOST SIZES ARE AVAILABLE. PLEASE NOTE HOLESIZE 1 FOR PLASTIC AND HOLESIZE 2 FOR METAL. PLEASE NOTE THAT THE WALL THICKNESS WOULD BE TYPICALLY MINIMUM 0.3 X E ON THE SCRS. PLEASE NOTE DEPTH ON BLIND HOLE SHOULD BE 10% MIN OF DIM B FOR PLASTICS AND 15% MIN FOR METAL

click HERE for a PDF version of this brochure page

Most sizes available from stock contact fsuk for further info.

Fastening Solutions UK is rated 9.9 out of 10 based on 136 ratings.