Search for [] ... Results Found : 20

FSUK-HISH

The HIS range of inserts has been developed with an opposing herringbone knurl on the outside to give a high level of performance in most Thermoplastics. This insert is available in a headed version to increase performance and aid with electrical contacts. It's designed to be installed into drill ... View Product.


FSUK-DUO

The Duo range is based on a opposing herringbone knurl with the advantage of it being symmetrical. It's designed to be installed into drilled or moulded holes using direct heat. (Not Ultrasonics) ... View Product.


FSUK-EXPP

The FSUK EXPP insert is a high-performance press in insert designed for Thermoplastics. It's designed to be pressed in cold into drilled or moulded holes. The insert has an anti vibration feature but without the high installation torque required with the EXP range. ... View Product.


FSUK-PUH

The FSUK PU insert is cold press in insert which is designed with a free running thread and will suit most types of Thermoplastics. It's designed to be pressed in cold into drilled or moulded holes and due to its combination of fins and knurls can achieve a high performance. ... View Product.


FSUK-HIHLH

The HIHL range has been designed with a rounded crest and knurl configuration to be installed into Notch Sensitive Plastics such as 30% Glass Filled Polycarbonate. This insert reduces the stress and is available in a headed version to increase performance and aid with electrical contacts. It's de ... View Product.


FSUK-SCRH

The SCR range is a self tapping range of inserts with internal and external threads and a slot to aid installation. It's designed to be installed into drilled or moulded holes and can be used where maximum strength is required. ... View Product.


FSUK-MUH

The FSUK MU range is designed with multiple helically knurled rings designed to be installed into hard brittle Thermosetting Plastics. These inserts are often used in the Electrical industry. It's designed to be installed cold into drilled or moulded holes. The sharp knurls allows high performanc ... View Product.


FSUK-EXPH

The FSUK EXP range is designed around a diamond knurl configuration with a slot which enables the insert to expand when the mating screw is assembled. This insert is designed more for Thermosetting Plastics although can be used in some Thermoplastics. Available in a headed and reverse head; it is ... View Product.


FSUK-BLD

The FSUK BLD range is a blind insert designed for moulding in rather than post insertion. The opposing herringbone knurl gives a very high level of performance.

The location pin should be designed as per our dimensions to ensure the insert locates correctly during the moulding process. ... View Product.


FSUK-FSUK-ANCHOR

The FSUK Anchor rivet bush is designed with serrations on the spigot and can be used in material as thin as 0.5mm up to 5.9mm. The spigot is designed to go through the sheet and be riveted over on the back allowing it to go into all types of material. They are generally available in Steel Self C ... View Product.


FSUK-FSUK-MINI-ANCHOR

The FSUK Mini-Anchor range has all the features of the standard Anchor but with a smaller body and panel range. The spigot is designed to go through the sheet and be riveted over on the back allowing it to go into all types of material. They are generally available in Steel Self colour or Zinc an ... View Product.


FSUK-SERRATED

The FSUK serrated face bush is offered as an alternative to the Serrated spigot and has a range of different hole sizes to give designers and sheet metal sub contractors a choice. The spigot is designed to go through the sheet and be rivetted over on the back allowing it to go into all types of m ... View Product.


FSUK-SCN

The FSUK Self-Clinch nut persuades material from the mating sheet to flow around the self-clinch groove and notches. They are designed to ensure the sheet is completely flush on the back and each size of nut can be installed into a large panel range. The steel nuts are hardened and designed to go ... View Product.


FSUK-SCS

The FSUK Self-Clinch studs is designed to be flush into a range of sheet metal without any need for welding. The studs are available in a variety of thread sizes and lengths. The FSUK Self-Clinch studs persuades material from the mating sheet to flow around the self clinch groove and notches. ... View Product.


FSUK-HPS

The FSUK high-performance studs are available for applications where a flush head is not required and a very high performance is. The FSUK Self-Clinch studs persuades material from the mating sheet to flow around the self clinch groove and notches. The steel studs are hardened and designed to ... View Product.


FSUK-FLUSH

The FSUK Flush range provides a strong reusable thread in sheet metal with a flush finish on both sides. It is designed to be installed into drilled or punched holes and must always be installed using a squeeze action. The tolerance on the hole must be -0.00 + 0.13mm. The Nuts are manufacture ... View Product.


FSUK-STAND-OFFS

The FSUK Stand-Offs are designed to serve as spacers normally to mount a PCB board in enclosures. They are available in a Blind of Through version and can be supplied in steel or stainless. The steel version are hardened and designed to go into sheet less than 80 Rockwell B, the stainless versi ... View Product.


FSUK-BROACH

The FSUK broaching nuts are designed to be installed into resin-based PCB Boards, they are installed using a flat punch with a squeeze action allowing the spigot to broach its way into the board. A stand-off version is also available. These nuts ensure a deep metal thread in the boards without t ... View Product.


FSUK-SCRS

The SCRS range is a Self Tapping range of inserts with internal and external threads and 3 holes to aid installation. It's designed to be installed into drilled or moulded holes generally for Thermosetting Plastics with up to 50% Glass Filled like Grivory. They are also an excellent insert to obtain ... View Product.


FSUK-BNUTS

The FSUK BNUT range has been designed to allow a Blind Self-Clinching Stand-off located on the inside of the panel to stop protrusion of screws and foreign objects. The steel version are hardened and designed to go into sheet less than 80 Rockwell B, the stainless version is designed to go into less ... View Product.


Search Again